F16Serious
Miele Washer F16 Error Code
The water level sensor (pressure switch) is not reading correctly or water level is too high/low.
Common causes
- Faulty pressure switch or hose
- Clogged pressure hose
- Overfilling due to valve issue
- Control board fault
How to fix it
- Turn off power
- Check pressure hose (small tube from drum to switch) for kinks or blockages
- Blow into hose to clear debris
- Test pressure switch with multimeter
⚠ When to call a pro: If hose clear and switch appears faulty, replace pressure switch.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.