F22Warning
Hotpoint Washer F22 Error Code
The water level has exceeded the expected level for the cycle.
Common causes
- Faulty pressure switch
- Blocked pressure hose
- Control board issue
How to fix it
- Check the pressure hose for kinks or blockages
- Test the pressure switch with a multimeter
- Reset power and try a different cycle
⚠ When to call a pro: If pressure switch tests bad
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.