F8Warning
Hotpoint Washer F8 Error Code
Insufficient water flow detected, often due to low water pressure or clogged inlet filters.
Common causes
- Water supply turned off
- Clogged inlet hose filters
- Low water pressure
How to fix it
- Check that both hot and cold water taps are fully open
- Clean the inlet hose filters (screens) where hoses connect to washer
- Check household water pressure (should be at least 20 psi)
⚠ When to call a pro: If water supply is fine and filters are clean
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.