E68Serious
Electrolux Dishwasher E68 Error Code
The wash motor relay on the control board has malfunctioned, causing motor issues.
Common causes
- Faulty relay on the main board
- Short circuit in motor windings
- Control board failure
How to fix it
- Reset the dishwasher by turning off power for 10 minutes.
- Check the motor connector for signs of burning or corrosion.
- Measure motor resistance (should be 10-20 ohms).
⚠ When to call a pro: If the motor tests good but the code returns, the control board needs replacement.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.