i40Serious
Electrolux Dishwasher i40 Error Code
The flood sensor in the base tray has detected water, stopping the cycle to prevent damage.
Common causes
- Leaking hose connection
- Cracked tub or sump
- Overfilled water due to faulty valve
How to fix it
- Turn off power and water supply, then check for visible water under the dishwasher.
- Dry the base tray thoroughly and check all hose connections for leaks.
- Run a rinse cycle test; if water reappears in the tray, locate the source.
⚠ When to call a pro: If you cannot find the leak source or it reappears, call a technician to avoid water damage.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.