i60Serious
Electrolux Dishwasher i60 Error Code
The controller detected an issue with the relay that controls the heating element.
Common causes
- Stuck or failed relay on the control board
- Short circuit in the heating element circuit
- Control board fault
How to fix it
- Turn off power and check the wiring harness to the heating element for damage.
- Measure the heating element resistance (should be 20-30 ohms).
- Reset the dishwasher by unplugging for 10 minutes.
⚠ When to call a pro: If the error persists after checking wiring, the control board likely needs replacement.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.