F35Warning
Amana Washer F35 Error Code
The washer is not filling with water properly or taking too long to fill.
Common causes
- Water supply turned off or low pressure
- Clogged inlet valve screens
- Faulty inlet valve solenoid
How to fix it
- Ensure both hot and cold water faucets are fully open.
- Clean the inlet valve screens (small mesh filters at the hose connections).
- Check that hoses are not kinked or frozen.
⚠ When to call a pro: If water pressure is good but no fill, test the inlet valve with a multimeter or replace it.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.