F10Serious
Whirlpool Oven/Range F10 Error Code
Oven temperature sensor reading is out of range (too high or low).
Common causes
- Faulty temperature sensor
- Wiring issue
- Control board malfunction
How to fix it
- Unplug range and inspect sensor wiring for damage.
- Test sensor resistance; should be ~1100 ohms at 70°F. Replace if not.
- Check connector pins for corrosion.
⚠ When to call a pro: If sensor tests good but error persists, control board replacement may be needed.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.