F10Serious
Hotpoint Oven/Range F10 Error Code
The oven temperature has exceeded safe limits, often due to a stuck relay or failed sensor.
Common causes
- Shorted oven temperature sensor
- Failed relay on control board
- Control board failure
How to fix it
- Unplug the range immediately.
- Allow oven to cool completely.
- Check sensor resistance; if shorted (near 0 ohms), replace sensor.
- If sensor is good, do not attempt further DIY; call a technician.
⚠ When to call a pro: Call a qualified technician immediately, as this can be a fire hazard.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.