E3Serious
Haier Dishwasher E3 Error Code
Water temperature does not reach required level during heating cycle.
Common causes
- Faulty heating element (open circuit)
- Defective thermistor (temperature sensor)
- Loose or burnt wiring connections
- Control board failure
How to fix it
- Unplug dishwasher and remove lower access panel.
- Check wiring connections to the heating element and thermistor.
- With a multimeter, test heating element resistance (typically 10-50 ohms).
- Test thermistor resistance at room temp (usually 10-50 kohms, varies by model).
⚠ When to call a pro: If readings are out of spec or you see signs of burning, call a technician for safe replacement.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.