E1Serious
Haier Dishwasher E1 Error Code
The dishwasher takes too long to fill with water, typically exceeding 10 minutes.
Common causes
- Water supply valve closed
- Kinked or blocked inlet hose
- Clogged inlet filter
- Faulty water inlet valve
How to fix it
- Verify the water supply valve is fully open.
- Check inlet hose for kinks or blockages.
- Clean the inlet filter screen located at the water connection.
- Ensure water pressure is adequate (min 20 psi).
⚠ When to call a pro: If the problem persists after checking supply and cleaning filter, the inlet valve or control board likely needs replacement.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.