F13Warning
GE Oven/Range F13 Error Code
The latch position sensor (switch) is not sending correct signal, possibly due to switch failure or misalignment.
Common causes
- Faulty latch position switch
- Wiring short or open
- Control board failure
How to fix it
- Same as F11: reset power, check for obstructions.
- Test latch switch continuity in both open and closed positions.
⚠ When to call a pro: If switch readings are incorrect (e.g., always open or shorted).
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.