E62Serious
Electrolux Dryer E62 Error Code
The thermistor that monitors heater temperature is defective, causing overheating or no heat.
Common causes
- Faulty thermistor
- Damaged wiring to thermistor
- Loose connection
How to fix it
- Unplug dryer and locate the thermistor near the heating element.
- Test thermistor resistance with a multimeter (should change with temperature).
- Inspect wiring and connectors.
⚠ When to call a pro: If thermistor is out of spec or wiring is damaged, replace and call if unsure.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.