F08Warning
Whirlpool Washer F08 Error Code
The washer is not filling to the correct water level.
Common causes
- Low water pressure
- Clogged inlet valve screens
- Faulty pressure switch
How to fix it
- Check that water supply valves are fully open.
- Clean the inlet valve screens using a brush.
- Ensure the drain hose is not siphoning water out.
⚠ When to call a pro: If water pressure is fine and screens are clean, the pressure switch or control board may need replacement – call a technician.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.