FEWarning
Samsung Washer FE Error Code
The washer is overfilling or not filling at the correct rate.
Common causes
- Stuck water inlet valve
- Faulty water level switch
- Clogged inlet hose
How to fix it
- Turn off water and check for debris in inlet screens.
- Clean screens and reconnect hoses.
- Initiate a fill cycle to see if it stops properly.
⚠ When to call a pro: If the washer continues to overfill or underfill, the water level sensor or valve may need replacement.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.