F01Serious
Miele Oven/Range F01 Error Code
The oven's temperature sensor (NTC) is defective or has a short circuit. Oven will not heat.
Common causes
- Faulty temperature sensor
- Loose connection to sensor
- Main board failure
How to fix it
- Power off oven for 5 minutes, then retry.
- Check and tighten sensor connector on main board.
- Measure sensor resistance (should be ~1 kOhm at room temp).
⚠ When to call a pro: If error persists after checking connections and sensor resistance is out of range, call a technician.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.