F2E7Warning
Maytag Dishwasher F2E7 Error Code
The float switch that senses water level is stuck open or closed.
Common causes
- Foam or debris holding float up
- Broken float or pivot
- Faulty float switch
- Wiring issue
How to fix it
- Remove lower rack and locate float assembly in tub bottom.
- Clean float and chamber of any debris.
- Test float movement manually; it should move freely.
- Check float switch continuity (normally open when down).
⚠ When to call a pro: If float moves freely but code persists, the switch or wiring needs professional diagnosis.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.