F30Serious
Kenmore Oven/Range F30 Error Code
The oven temperature exceeded 600°F (315°C) due to a malfunction.
Common causes
- Shorted oven temperature sensor
- Stuck relay on control board
- Faulty control board
How to fix it
- Immediately unplug the range
- Allow the oven to cool completely
- Check the oven sensor resistance (should not be near zero ohms)
⚠ When to call a pro: If sensor is good, the control board likely has a stuck relay; do not use until repaired by a professional.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.