F1Serious
Hotpoint Dishwasher F1 Error Code
The dishwasher's water inlet valve is not functioning properly, causing no water or insufficient water fill.
Common causes
- Faulty water inlet valve
- Loose or damaged wiring to the valve
- Low water pressure
How to fix it
- Check that the water supply is turned on and the hose is not kinked.
- Inspect the inlet valve connector for any loose wires.
- If valve clicks but no water, replace the inlet valve.
⚠ When to call a pro: If replacing the inlet valve does not resolve the issue, call a technician for further electrical diagnosis.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.