E1Warning
Haier Washer E1 Error Code
The washer is not draining water within the allotted time, usually due to a clog or pump failure.
Common causes
- Clogged drain hose or filter
- Drain pump failure
- Kinked drain hose
How to fix it
- Unplug washer and check drain hose for kinks or blockages.
- Clean the drain pump filter (accessible via front panel).
- Ensure drain hose is not too far down the standpipe.
⚠ When to call a pro: If steps above do not clear the error, or if you hear unusual noise from the pump area.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.