E23Warning
Frigidaire Washer E23 Error Code
The drain pump relay on the control board is stuck or open.
Common causes
- Failed drain pump relay on main board
- Short circuit in drain pump wiring
- Drain pump drawing too much current
How to fix it
- Unplug washer and inspect drain pump wiring for shorts or burns.
- Check pump resistance (usually 10-20 ohms).
⚠ When to call a pro: If pump wiring is good but relay error persists, main board likely faulty.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.