E63Warning
Electrolux Washer E63 Error Code
The temperature sensor is faulty or reading incorrectly.
Common causes
- Faulty thermistor (NTC sensor)
- Loose or damaged wiring to thermistor
- Control board issue
How to fix it
- Check the thermistor connector on the heater assembly for corrosion.
- Measure resistance with a multimeter at room temperature (should be ~10-50kΩ).
- Reseat the connector.
⚠ When to call a pro: If the thermistor appears disconnected or resistance is out of spec.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.