E44Serious
Electrolux Washer E44 Error Code
The door lock relay circuit on the control board is faulty.
Common causes
- Faulty main control board (PCB)
- Short circuit in door lock wiring
How to fix it
- Try a power reset: unplug for 5 minutes, then plug back in.
- Check the door lock connector on the control board for looseness.
- Inspect wiring for burning or damage.
⚠ When to call a pro: If reset does not clear the error.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.