F24Warning
Electrolux Oven/Range F24 Error Code
A second temperature sensor (e.g., for convection) has failed.
Common causes
- Defective secondary temperature sensor
- Wiring issue
- Control board fault
How to fix it
- Locate secondary sensor (often in convection fan area).
- Check connector and wiring.
- Measure resistance; should be similar to main sensor (~1100 ohms).
⚠ When to call a pro: Replace sensor if faulty; if code persists, control board may need service.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.