F10Serious
Amana Oven/Range F10 Error Code
The oven temperature exceeds safe limits, usually due to a stuck relay or failed sensor.
Common causes
- Faulty oven temperature sensor
- Shorted heating relay on control board
- Control board failure
How to fix it
- Immediately turn off oven and disconnect power.
- Check sensor resistance (should be ~1090 ohms at room temp).
- If sensor is good, the control board likely has a welded relay.
⚠ When to call a pro: Call a professional immediately if F10 appears; do not use oven until repaired.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.