F2Warning
Amana Dishwasher F2 Error Code
The water valve circuit is malfunctioning, possibly open or shorted.
Common causes
- Faulty water inlet valve
- Wiring harness issue
- Failed control board
How to fix it
- Check wire connections to the water inlet valve.
- Test the water inlet valve coil resistance with a multimeter (should be 500-1500 ohms).
⚠ When to call a pro: If valve tests bad, replace it; if wiring is fine and valve good, the control board may be faulty.
Part links are affiliate links — as an Amazon Associate we may earn a small commission at no extra cost to you.
Always unplug the appliance (and turn off the water for washers/dishwashers) before inspecting. These guides are for information only and are not a substitute for a professional repair.